{"product_id":"infrared-thermometer","title":"Infrared Thermometer","description":"\u003cp class=\"p1\"\u003eThe infrared thermometer is light weight and designed to scan the forehead of individuals for the monitoring and detection of elevated body temperatures, without direct personal contact. This thermometer also measures the temperature of objects.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003eFeatures of the infrared hand held thermometer\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• An automatic high temperature warning alarm, which sirens when measurements are above 38°C.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• High sensor quality which gives a temperature result in ONE second.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• An LED luminous display function, suitable for measuring at night (also prevents disturbance for babies).\u003c\/p\u003e\n\u003cp\u003e• One key operation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Has a large memory capacity that stores up to 32 measurements, ideal for monitoring of children and sick patients.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis infrared thermometer is suitable for use when conducting temperature checks used by hospitals, offices, airports, at home and mobile screenings.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003eSpecial Instructions\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e• Always read instructions before use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Always use a clinical thermometer when high accuracy body temperature measurements are required.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Always use a clinical thermometer to verify any abnormal temperature measurements.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• For the most accurate results, readings should be conducted at ambient room temperature of 10 to 40°C (50 to 140°F). If the surrounding temperature is lower than 10°C or higher than 40°C, measurement accuracy is not assured.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Make sure the skin is dry and that no hair interferes with the measurement.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Do not immerse the thermometer in water.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Avoid touching and\/or scratching the infrared sensor lens.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Clean the lens area by gently blowing with compressed air and use a damp swab to wipe the lens. Do not use any solvents to clean the lens.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the scanners suitability for the intended use.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003eInstructions for use\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eMeasurements Notes\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• If the thermometer has been stored in a cold or hot environment, allow at least 30 minutes for the unit to acclimate to room temperature before taking measurements.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To prevent transmission of disease, avoid direct contact with the skin.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• After heavy exercise always wait at least 10 minutes before taking forehead temperature readings.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Temperature Mode settings\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• With the meter ON, press “Mode” button for three seconds until to “F-1” shown to enter the long term calibration drift correction mode. On entering the mode, the previous temperature correction factor will appear on the display. To make a correction, measure a known, fixed temperature source. Enter the correction mode and press the + or – buttons to change the correction value and minimize the difference in readings. Repeat and adjust the correction value as needed until the measurement on the meter matches the known temperature. The mode is applied to Body Temp.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the “Mode” button a second time “F-2” shown to set the alarm temperature limit. Press the + or – buttons to change the value. The mode is applied to Body Temp.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the “Mode” button a third time “F-3” shown to set the °C\/°F temperature units. The temperature units °C or °F will be shown. Press the + or – buttons to change the unit.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the “Mode” button a forth time “F-4” shown to set the backlit status. Press the + or – buttons to switch from ON to OFF.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the “Mode” button a fifth time “F-5” shown to set the laser status. Press the + or – buttons to switch from ON to OFF.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNotice: Only when the laser head installed.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBody Temperature Measurement\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePlease note that the forehead\/temples must be free from sweat and cosmetics and that taking vasoconstrictive medication and skin irritations can distort the result when measuring temperature on the forehead.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the trigger to switch the thermometer on with one beeper. The device performs a brief self test: all elements of the display are shown for approx. 1 second. Following a successful self test with backlit (Red-Orange-Green),\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the “B\/O” button for “Body temp” for accurate measurements in the range of 32.0 to 42.9°C (89.6 to 109.2°F).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Hold the meter by its handle and point it toward the surface to be measured. Measurement distance should be \u0026lt;2.5cm(\u0026lt;1 in ).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Press the trigger to take a temperature reading. The temperature reading appears in the display. If the F-4 MODE of backlit \u0026amp; “ \/ ”button voice ON \u0026amp; F-3 MODE set alarm temperature 38.0°C:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNotice: Red Backlit is followed alarm temperature limit (Fever alarm).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Release the trigger and the reading will hold for approximately 15 seconds after which thermometer will automatically shut off.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNote: Before shutting off the infrared thermometer, you can take further measurement.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• If the temperature goes above 109.2°F or 42.9°C, “Hi” will appear in the display.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIf the temperature goes below 89.6°F or 32.0°C, “Lo” will appear in the display\u003c\/p\u003e\n\n\n\u003cp class=\"p1\"\u003eThe infrared thermometer is light weight and designed to scan the forehead of individuals for the monitoring and detection of elevated body temperatures, without direct personal contact. This thermometer also measures the temperature of objects.\u003c\/p\u003e\n\u003cp\u003eWhile stocks last. Exact model will vary according to availability\u003c\/p\u003e\n","brand":"I-Surgical","offers":[{"title":"Default Title","offer_id":45377499562031,"sku":null,"price":1149.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/9964\/8559\/files\/8521_infrared-thermometer-delta-health-and-safety-1.jpg?v=1779383166","url":"https:\/\/i-surgical.com\/products\/infrared-thermometer","provider":"I-Surgical","version":"1.0","type":"link"}